Automatic Fire Protection. Installs in Minutes. Tough Enough For Texas
Automatic, Clean, Easy To Install, Maintanence-Free Fire Suppression Delivered Right To Your Door
Your building's sprinkler system protects the building. It does nothing for the equipment inside - the engine bay, the electrical cabinet, the machine running in the next room. BlazeCut goes inside the enclosure itself, right where fires actually start.
Fire Protection Ready When You Aren't.
Your classic car. Your work van. Your 3D printer running overnight.
Your pump jack in the middle of nowhere. None of it came with automatic fire protection - and if something ignites, you'll have seconds, not minutes.
BlazeCut is a single self-contained tube that mounts inside your engine bay, enclosure, or equipment and discharges automatically when it counts. No wiring. No switches. No contractor. No call to your insurance agent.
Fully Automatic
No wires, no triggers, no worries - BlazeCut is always ready
Clean Suppression
Our FK-5-1-12 agent is safe for people, your engine, and the environment
Easy DIY Install
Installs in minutes - protects for years without any maintenance needed
What Is A BlazeCut T-Series
The T-Series BlazeCut Units (like the one pictured) are a mess-free, maintenance-free, headache-free, automatic fire suppression system for the things that matter most.
Simply mount the unit using the provided zip ties within any enclosure where the fire risk is a bit too much to be ignored (engine bays, battery compartments, enclosed 3D printers, etc...)
If a fire were to occur the heat sensing tubing of the BlazeCut would activate releasing the non-toxic, pressurized suppression agent directly on to the hottest part of the fire - stopping it before things have a chance to get out of control.
Mount your BlazeCut today and sleep soundly tonight knowing that you took a huge step towards keeping you, your family, your friends, and the things you enjoy together safe and sound.
How it Works
No wiring. No switches. No maintenance.
It's one tube. That tube is the detector, the storage container, and the delivery system all at once. Mount it inside the space you want to protect - engine bay, enclosure, cabinet, printer housing - and leave it. When heat at the source hits the critical threshold, the tube melts and discharges the entire HFC agent charge directly onto the fire, in the exact spot it's needed.
No one has to be there. No alarm has to sound first. No button gets pressed.
It just works.
1. Mount The unit
Zip ties or one-hole straps. Most installs take under fifteen minutes. No electrician, no contractor, no special tools.
2. Heat Triggers The Discharge
When temperature at the fire source hits activation temperature the tube melts at the hottest point and releases the full charge directly onto the hottest part of the fire.
3. The Fire Is Put Out
Clean FK-5-1-12 agent - no water, no powder, no foam. It suppresses the fire without soaking your wiring, corroding your engine, or destroying the thing you were trying to protect.
4. Replace and reset
Swap the tube, recharge, and you're back. Between uses, there's nothing to check, test, or service.
"I CANNOT STRESS TOo STRONGLY THAT THE BLAZECUT FIRE SUPPESSION SYSTEM ALONE SAVED MY CAR!! YOU CAN'T GET BETTER FIRE PROTECTION!"
- BlazeCut saved Mark's vintage Lotus Espirt moments after the engine bay erupted in black smoke and flames. The fire didn't even have time to singe the paint.
** Unit pictured is legacy model - new models have black heat sensing tube **
Why Choose BlazeCut?
BlazeCut installs cleanly under the hood of nearly any vehicle — no wiring, no drilling, no hassle.
Each system is fully self-contained and mounts in minutes using the included zip ties.
Whether it's a ‘69 Camaro or a custom-built hot rod, BlazeCut adapts to your engine bay without modifying a thing.
It stays out of sight until the moment you need it — automatically detecting heat and suppressing fire with a clean, residue-free agent that won’t harm paint, chrome, or electrical components.
READ THE TEXAS FIRE WIRE
Click here to read our latest blog posts from our blog The Texas Fire Wire