Protect Your Equipment. Prevent Downtime. Finish the Job.
Fires can start fast in generators, light towers, and electrical panels costing you days of work and thousands in repairs. BlazeCut stops fires automatically, right at the source.
No power. No wiring. No mess. No hesitation.
Fire Suppression That Keeps Working Even When You're Off The Clock.
BlazeCut is a fully self-contained fire suppression system that installs directly inside the equipment and enclosures you already use. No wiring, no sensors, and no external power required.
It continuously monitors for excessive heat and activates automatically when a critical temperature is reached.
Once triggered, BlazeCut releases a clean, electronics-safe agent directly at the fire source.
There is no mess to clean up, no damage to engines or electrical components, and no downtime waiting for inspections or replacements.
It is ideal for generators, tow-behind light towers, compressor units, and electrical panels where traditional suppression systems do not fit or reach.
Whether your equipment runs unattended overnight or out in the field, BlazeCut provides constant protection from electrical fires, short circuits, and overheating without the complexity of full-scale suppression systems.
Fires Happen Without Warning - BlazeCut Protects Without Hesitation - Automatically, 24/7
Some BlazeCut models include an integrated pressure switch that activates the moment the system discharges.
This switch can be wired to shut down equipment, trigger an alarm, or send a signal to your site’s safety system, giving you complete control over what happens after a fire is stopped.
It is ideal for worksites with generators, lighting towers, compressor units, or electrical panels that run unattended or overnight.
The switch module adds flexibility without adding complexity, and it is available on models such as the TR200FK-S and TR300K-S. The “S” in the product code identifies models that include the integrated switch.
If you want to cut power automatically, trigger visual or audible alerts, or connect BlazeCut to your existing safety controls, this feature delivers smarter protection for critical job site equipment.
BlazeCut’s special tubing constantly senses rising temperatures inside enclosed spaces, staying alert even when no one is around.
When the air around the tubing reaches its activation point of about 221°F (105°C), the heat causes the tube to burst precisely at the hottest spot near the developing fire.
A clean, non-toxic agent is instantly released, smothering the flames at the source and stopping the fire before it can cause damage or downtime.
**Units pictured are legacy models - The newer models have black heat sensing tubing**
You know how it goes on a jobsite - one spark in a generator or a bad wire in a light tower can take your gear out and throw off the whole schedule.
When that happens, you are losing time, money, and maybe the next job.
BlazeCut keeps that from happening. It installs right inside your equipment and knocks down a fire the moment things get too hot. No wiring, no power, and no maintenance needed. It just works, protecting your crew, your tools, and your bottom line.
Most systems are built for showrooms, not construction sites. BlazeCut is built for work. It can handle vibration, dust, and rough conditions without missing a beat. It is tough, simple, and proven to stop fires before they spread.
Whether your gear runs overnight or gets hauled from site to site, BlazeCut gives you reliable protection that keeps your operation moving and your reputation solid.
Fully Automatic
No wires, no triggers, no worries — BlazeCut is always ready
Clean Suppression
Our FK-5-1-12 agent is safe for people, your engine, and the environment
Easy DIY Install
Installs in minutes - protects for years without any maintenance needed
Protect the Equipment That Keeps Your Business Moving
One fire can shut down a site, damage your gear, and cost you more than just repairs. BlazeCut gives you automatic protection that works when you cannot be there. It installs in minutes, requires no maintenance, and activates the second things get too hot.
BlazeCut installs inside your equipment enclosure and reacts automatically to high heat. When the temperature reaches a critical point, the tube releases a clean extinguishing agent directly onto the fire source, stopping it before it spreads.
Yes. BlazeCut is built for the real world, not clean showrooms. Each system is sealed, vibration-resistant, and tested to perform in dust, heat, and harsh environments. Whether it’s mounted on a generator, light tower, or compressor, BlazeCut keeps working reliably through transport, vibration, and temperature swings.
No. BlazeCut is completely self-contained. It does not need any wiring, sensors, or external power. Once installed, it stays ready to activate at any time, even if your equipment is shut off.
Each system has a typical service life of 5-10 years. There is no regular maintenance required during that time. You simply inspect the tube visually for any physical damage as part of your normal equipment checks.
When BlazeCut discharges, the clean agent suppresses the fire and leaves no residue or corrosion. You can replace the used unit quickly and get your equipment back in service with minimal downtime.
Yes. Some models include an integrated pressure switch that triggers when the system activates. It can be wired to shut down power, sound an alarm, or send a signal to your site’s safety system for added control and awareness.
