Peace of Mind at the Dock.
Life-Saving Protection Offshore.
No panic - no hesitation. BlazeCut responds to fire the moment it starts, even if you're miles from shore.
How BlazeCut Protects on the Water
BlazeCut is a fully self-contained fire suppression system that installs directly inside the compartments you already rely on - no wiring, no sensors, and no external power required.
Just mount it near high-risk areas like engine bays, battery boxes, or PWC hulls.
It continuously monitors for excessive heat and activates automatically when temperatures reach a critical level.
The heat-sensitive tube melts at the hottest point and releases a clean, electronics-safe extinguishing agent right at the fire source.
There’s no water damage, no corrosive residue, and no complicated reset process - just immediate, targeted fire suppression in the most vulnerable areas of your vessel.
Whether your boat is stored, docked, or cruising offshore, BlazeCut provides round-the-clock protection and peace of mind.
Fires Happen Without Warning - BlazeCut Protects Without Hesitation - Automatically, 24/7
1. Heat Is detected
BlazeCut senses dangerous temperature spikes inside your engine bay or electrical enclosure automatically.
2. Critical Temp Is Exceeded
When the air around the tubing reaches its activation point of about 221°F (105°C), the heat causes the tube to burst precisely at the hottest spot near the developing fire.
3. The Fire Is Stopped In Seconds
A clean, non-toxic agent is instantly released, smothering the flames at the source and stopping the fire before it can cause damage or downtime.
**Units pictured are legacy models - The newer models have black heat sensing tubing**
Why Choose BlazeCut?
Fires on the water escalate fast and when you’re miles from the dock, help isn’t minutes away.
That’s why BlazeCut is designed to act instantly, without needing a hand to pull a pin or hit a button.
It installs directly inside your engine bay, battery compartment, or literally anywhere on your vessel and stays armed 24/7.
There are no wires to route, no batteries to check, and no maintenance to remember.
If a fire starts, BlazeCut reacts before you even know it's there - releasing a clean, electronics-safe agent that won’t damage your wiring, controls, or equipment.
From weekend fishing boats to high-performance PWCs, BlazeCut fits discreetly into the vessels you already own and love - and protects them without changing how you use them.
It’s the easiest way to secure your investment, your time on the water, and the safety of everyone on board.
Fully Automatic
No wires, no triggers, no worries — BlazeCut is always ready
Clean Suppression
Our FK-5-1-12 agent is safe for people, your engine, and the environment
Easy DIY Install
Installs in minutes - protects for years without any maintenance needed
Safeguard Your Boat and Everyone On It.
nstall BlazeCut once and stay protected every time you hit the water. Whether you’re tied to the dock or miles offshore, your fire suppression is already in place — no wires, no maintenance, no guesswork.
Frequently asked questions
How is BlazeCut different from a traditional fire extinguisher or suppression system?
BlazeCut is fully automatic and self-contained. It doesn’t require wires, sensors, or human activation. Once installed inside your engine bay or battery compartment, it monitors for heat and deploys instantly when needed — even if you're not onboard.
Can BlazeCut be used on any type of boat or PWC?
Yes. BlazeCut is designed to fit a wide range of personal and commercial vessels, including fishing boats, jet skis, yachts, and outboards. It's compact, flexible, and easy to install in tight spaces where traditional systems can’t reach.
Will it damage my engine or electronics when it activates?
No. BlazeCut uses a clean, electronics-safe extinguishing agent that leaves no residue, won’t short-circuit your system, and doesn’t require cleanup. It’s safe for sensitive components and wiring.
Does BlazeCut require maintenance or inspections?
None. Once installed, BlazeCut is passive and maintenance-free for up to 10 years depending on the application. There's no power source, battery, or upkeep required.
What if I’m far from shore when a fire starts?
That’s exactly what BlazeCut is built for. It works without human intervention, stopping fires automatically even if you’re distracted or away from the compartment. It buys you time, protects your equipment, and can prevent a small problem from turning into an emergency.
How do I install it?
BlazeCut is designed for simple, DIY-friendly installation. Just mount the tube horizontally at the top of the compartment you want to protect, such as an engine bay or battery box. No wiring, no drilling (in most cases), and no technical setup required — most users have it fully installed in under 30 minutes.