automatic, Hassle-free Fire PRotection
Protect What Matters Most
BlazeCut is incredibly versatile and can be used to protect your life, the lives of your loved ones, and the things you enjoy together.
Click below to find the right BlazeCut Unit for you.
What Is A BlazeCut?
The T-Series BlazeCut Units (like the one pictured) are a mess-free, maintenance-free, headache-free, automatic fire suppression system for the things that matter most.
Simply mount the unit using the provided zip ties within any enclosure where the fire risk is a bit too much to be ignored (engine bays, battery compartments, enclosed 3D printers, etc...)
If a fire were to occur the heat sensing tubing of the BlazeCut would activate releasing the non-toxic, pressurized suppression agent directly on to the hottest part of the fire - stopping it before things have a chance to get out of control.
Mount your BlazeCut today and sleep soundly tonight knowing that you took a huge step towards keeping you, your family, your friends, and the things you enjoy together safe and sound.
Stops Fires Automatically
Heat-activated system detects and suppresses fires right at the source, even in unmonitored spaces.
Clean, Safe, and Maintenance-Free
Leaves no mess, requires zero maintenance, and is safe for electronics, vehicles, and people.
Installs in Minutes, Protects for Years
Just mount it and forget about it. Lifespan of ~8 years with a built-in pressure gauge.
Saved By BlazeCUt
"After losing my first VW Bus to a fire years ago, I installed a BlazeCut automatic fire suppression system in my current vehicle—a 1966 VW SO44 camper, one of an estimated ten known to still exist. Recently, the engine compartment caught fire. When I went to grab a handheld extinguisher, I heard the BlazeCut deploy under pressure, momentarily forgetting it was installed.
Within seconds, the situation went from approximately four-foot flames to zero. The fire was completely extinguished before it could cause catastrophic damage. The system performed exactly as designed, and quite frankly, exceeded expectations.
I often recommend BlazeCut to others running classic VW engines, and this experience only reinforced my confidence in the design and reliability of your system. I’m extremely grateful for the protection it provided and will be installing a new unit before driving the vehicle again.
I’ve attached a few photos of the bus and the deployed unit in case they’re useful to you.
Thank you for designing such an effective and well-thought-out safety solution.
Much appreciated, last attached is my fire without a blaze cut . Never again."
"I CANNOT STRESS TOo STRONGLY THAT THE BLAZECUT FIRE SUPPESSION SYSTEM ALONE SAVED MY CAR!! YOU CAN'T GET BETTER FIRE PROTECTION!"
- BlazeCut saved Mark's vintage Lotus Espirt moments after the engine bay erupted in black smoke and flames. The fire didn't even have time to singe the paint.
What size blazecut Do you need?
1. Heat Is detected
BlazeCut’s special tubing constantly senses rising temperatures inside your RV’s engine bay or electrical space, staying alert even when you’re miles away.
2. Critical Temp Is Exceeded
When the air around the tubing reaches its activation point of about 221°F (105°C), the heat causes the tube to burst precisely at the hottest spot near the developing fire.
3. The Fire Is Stopped In Seconds
A clean, non-toxic agent is instantly released, smothering the flames at the source and stopping the fire before it can cause damage or downtime.
Frequently asked questions
How does BlazeCut work?
BlazeCut uses a heat-sensitive tube containing extinguishing agent. When exposed to high temperatures, the tube melts and releases the agent to suppress the fire automatically.
Where can BlazeCut be installed?
Common installation sites include engine compartments, electrical cabinets, data centers, and enclosed spaces at risk of fire; it’s important to check specific product volume recommendations for each enclosure.
What types of fires does BlazeCut suppress?
BlazeCut is effective on electrical, liquid, and solid fuel fires, particularly in small closed spaces.
What is the lifespan/shelf life of a BlazeCut system?
The tube and system can last between 5 and 10 years, depending on environment and application.
Does BlazeCut leave behind residue or damage equipment?
BlazeCut uses clean agents which do not conduct electricity, corrode, or damage electronics, and are safe for people in typical application volumes.
How Does Shipping work? How long until my order arrives?
All BlazeCut orders are processed and shipped from our Wisconsin facility. We use UPS Ground for all deliveries, serving customers across the United States and U.S. territories.
Orders are typically processed within up to five (5) business days after payment is confirmed. Once shipped, most packages arrive within 3 to 9 business days, depending on your location. You’ll receive an email with your UPS tracking number as soon as your order leaves our warehouse, so you can monitor its progress in real time.
Please note that orders are fulfilled only on business days (Monday through Friday), and delivery times may vary slightly due to carrier delays, weather, or holidays.
Do You Accept returns or issue refunds?
we do not accept product returns for any reason once an order has been shipped. However, in cases where an order arrives damaged, is lost in transit, or experiences another issue outside of the customer’s control, we will evaluate the situation individually.
If we determine that a refund is the most appropriate resolution, it will be issued at our discretion after review. Customers must contact Modern Fire Suppression within a reasonable timeframe from the delivery or expected delivery date to initiate a claim.
See Blazecut in action
Check out some more videos of BlazeCut doing what BlazeCut does best - stopping fire dead in its tracks.